How to act if it gets wet to your computer or mobile phone
Whether mobile phone or computer, before going to the technician there are certain tricks that can carry out at home to avoid damaging itsinterior parts
One of the big technology companies is to create waterproof electronic devices.
Although already have been distributed several with this feature, mostremains very sensitive to any aquatic environment contact.
For this reason, the mobile phone or computer to get wet for any reason is a great problem for users, especially if it is unknown how to act correctly.
Almost always appliances end up damaging completely because theyare not given adequate treatment to remove the liquid.
For example, one of the first reactions is touching the buttons or pressthe power button to see if it still works.
Big mistake! Sometimes not the device has been damaged, but after performing such actions produced shorts that are fatal.
As many do not know about what should be done in these cases, we will then share some practical advice.
That Yes, they do not guarantee that the device will work and is in perfect condition. Sometimes moisture affects hard-to-reach parts which pass bill later.
Do not turn on the device
If the device got wet while on, turn it off immediately and do not attempt to tighten any of its keys.
If by luck he was off, do not try to check if it still works. Remove all items that can be removed and tries to extract excess water.
Try to manipulate it in these conditions the only thing that will cause isthat important components for shorts burning.
If possible you should leave it still one or two days before attempting to light it again.
Remove the battery
Although this measure is linked to the previous point, it is important tomake a special mention because of the battery depends on the operation of the device.
After having an accident with water, remove immediately this component, as well as the SIM card and memory.
If you do this in time you can save the device, since any circuit can be activated without this element within the mobile.
Continuing with the steps which should be taken by common sense, the next step is to use a soft cloth to dry each part of the device.
Well dry battery and then put it in a ventilated to ensure that he does not become a trace of moisture.
It also absorbs water remaining in the small slots that can be achievedby removing the battery.
Watch out! Avoid the use of hair dryers, because it may be worse. It isbest to leave it in the Sun without attempting another class of methods.
Try the rice trick
The famous trick of rice continues as a measure to absorb moisture from electronic devices.
Enter the mobile or tablet in a generous amount of rice, and leave it there for one or two days.
Water remaining in those internal parts which do not reach to clean with a cloth will be removed at this time.
This trick is not so preferred to computers because, besides being less practical, rice can be inserted into slots and worsen the problem.
It uses gel balls
The gel balls that contain some of the objects that you buy in the market can also be helpful to remove excess liquid.
These are designed for the same purpose and are an alternative for those who prefer not to waste their rice.
Use a proper cleanser
If the moisture absorbed your device is different from the water, for example a sweetened drink, you'll be faced with a more complex problem.
Sugar is sticky and harder to clean while you wait for the prudent time.It can be in small particles that warming causes damage to the circuits.
When they fall, for example, on the keyboard, you can use cleaner soldin shops for this purpose.
However, it is to take them to the service so that they can remove all the excesses of the interior components.
On the other hand, if the device got wet with salt water news are not all encouraging. Salt is much more harmful than the fluid and there are very few chances to be saved.
For these cases the only attempt will be take it technician to see if it has any product suitable for cleaning.
Following these tips, and especially patience, you are more likely to save or prolong the life of your device.